Comments on: Getting started with A2Billing – Part 3 Creating an access DID

By: Riyaz

Riyaz — Fri, 24 Dec 2010 00:17:04 +0000

Hi Matt,

First i would like to thank to you for you excellent how to on Freepbx + A2billing, thanks a lot.Well, i got a problem on assigning DID with a2billing, i followed you tutorial steps by steps more than 10 times, seriously i can’t find any link between the trunk created on freepbx and my a2billing customers to making calls trough that trunk, and also if i make a call like that, dialing to my did the call disconnect immediatly, and this is what i got on my asterisk cli :

- http://paste.ubuntu.com/547077/

Could you please check and tell me what’s wrong ? thanks a lot

By: matt

matt — Wed, 18 Nov 2009 20:38:24 +0000

Can you see from the logs what SIP URL is being sent to CallWithUs? Does it look ok?

By: sana

sana — Wed, 18 Nov 2009 06:34:58 +0000

Hi Mat
I have a problem with this setup. I can call through callwithus sip without a2billing configuration successfully. However, with a2billing I can enter customer pin number and enter the phone number.Then it tell remaining minutes and DISCONNECTED. my log file gave “Got SIP response 484 “Address Incomplete” “. Do you have any idea?

By: matt

matt — Sat, 26 Sep 2009 16:28:03 +0000

Hi Dec,

I think you should be able to find it at – /var/lib/asterisk/agi-bin/lib – or at least a symbolic link to where the files actually are. What do you have there?

Matt

By: Dec

Dec — Sat, 26 Sep 2009 15:18:24 +0000

Hello Matt..

I am having the same issue and i cant find the libs_a2billing directory in my a2billing 1.4.1 installation.. Any ideas?

Regards.

Dec

By: matt

matt — Sat, 20 Jun 2009 09:14:36 +0000

You could try checking in /etc/asterisk/a2billing.conf to see what “debug” is set to. Try setting “debug=3″, hopefully that will give you more information in the logs about what is going on.

By: mepj

mepj — Sat, 20 Jun 2009 03:32:32 +0000

Thanks Matt,
the file(a2billing.php) and the folder(libs_a2billing) exist.

By: matt

matt — Fri, 19 Jun 2009 21:07:53 +0000

Hi mepj, looks like it’s hitting that custom destination ok and trying to be passed to a2billing. Does the php file exist in the correct place? You should have a file called /var/lib/asterisk/agi-bin/a2billing.php (and also /var/lib/asterisk/agi-bin/libs_a2billing)

By: mepj

mepj — Fri, 19 Jun 2009 20:34:15 +0000

thank you Matt, i tried the guide to create the custom a2b in freepbx but when I dial into the system nothing happens I only get busy signal hungup and see the following in console. all out going calls from extensions are “call rejected”

Set(“SIP/abc-trunk-c0136058″, “__FROM_DID=1111111111″) in new stack
— Executing [1111111111@from-trunk:2] ExecIf(“SIP/abc-trunk-c0136058″, “0 ?Set(CALLERID(name)=5555555555)”) in new stack
— Executing [1111111111@from-trunk:3] Set(“SIP/abc-trunk-c0136058″, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
— Executing [1111111111@from-trunk:4] Set(“SIP/abc-trunk-c0136058″, “CALLERPRES()=allowed_not_screened”) in new stack
— Executing [1111111111@from-trunk:5] Goto(“SIP/abc-trunk-c0136058″, “custom-a2billing-did,1111111111,1″) in new stack
— Goto (custom-a2billing-did,1111111111,1)
— Executing [1111111111@custom-a2billing-did:1] DeadAGI(“SIP/abc-trunk-c0136058″, “a2billing.php|1|did”) in new stack
— Executing [1111111111@custom-a2billing-did:2] Hangup(“SIP/abc-trunk-c0136058″, “”) in new stack
== Spawn extension (custom-a2billing-did, 1111111111, 2) exited non-zero on ‘SIP/abc-trunk-c0136058′

what is likely the reason?

thanks.
Mepj

By: matt

matt — Tue, 16 Jun 2009 00:34:16 +0000

Hi Mepj,

I have made a post here describing how to create those destinations. It does involve editing some config files on the server.

Regards, Matt