Comments on: Getting started with FreePBX – Part 4 Setting up a DID number http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386 UK based Asterisk, Trixbox, FreePBX and A2Billing Servers Mon, 06 Feb 2012 16:56:24 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: matt http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386#comment-3366 matt Sat, 23 Apr 2011 12:24:23 +0000 http://sysadminman.net/blog/?p=386#comment-3366 The format that the caller ID is presented varies between different providers. Sometimes you need to check in the logs to see the format it is coming as. You could accept all calls initially and then check the CDR to see the format. You may need to manipulate the number on the outound route to get the outbound call back to work. The format that the caller ID is presented varies between different providers. Sometimes you need to check in the logs to see the format it is coming as. You could accept all calls initially and then check the CDR to see the format.

You may need to manipulate the number on the outound route to get the outbound call back to work.

]]> By: dinesh http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386#comment-3365 dinesh Sat, 23 Apr 2011 12:18:06 +0000 http://sysadminman.net/blog/?p=386#comment-3365 I am using ipkall number in inbound and i want use it in call back system but when i call from my cell number to this it does not call back me and when i use this number to forward on extension i see the incoming number different. It does not show my cell number in incoming number. How it will show the exact incoming number? Thanks for your support in advance I am using ipkall number in inbound and i want use it in call back system but when i call from my cell number to this it does not call back me and when i use this number to forward on extension i see the incoming number different. It does not show my cell number in incoming number. How it will show the exact incoming number? Thanks for your support in advance

]]> By: matt http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386#comment-1509 matt Wed, 10 Feb 2010 20:20:12 +0000 http://sysadminman.net/blog/?p=386#comment-1509 do you have voicemail turned on for the extension the calls are going to?, and how are you doing the callback? with the FreePBX callback module? do you have voicemail turned on for the extension the calls are going to?, and how are you doing the callback? with the FreePBX callback module?

]]> By: Av http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386#comment-1508 Av Sun, 07 Feb 2010 20:38:10 +0000 http://sysadminman.net/blog/?p=386#comment-1508 Hi Matt, Thanks for the quick reply, Now I made it work. not with ipkall, but the same number which I used in Trunk. So now I am using same number for Inbound and Outbound Call for callback. when I dial the DID number, it says ``the person is busy, leave message``, when I hung up then I am getting my call back but I wanted to hear busy tone instead so I wont get charge. Is there any way to hear busy tone instead message. Sorry for my bad english :) Thanks again Hi Matt,
Thanks for the quick reply, Now I made it work. not with ipkall, but the same number which I used in Trunk. So now I am using same number for Inbound and Outbound Call for callback. when I dial the DID number, it says “the person is busy, leave message“, when I hung up then I am getting my call back but I wanted to hear busy tone instead so I wont get charge. Is there any way to hear busy tone instead message. Sorry for my bad english :)

Thanks again

]]> By: matt http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386#comment-1507 matt Sun, 07 Feb 2010 14:03:05 +0000 http://sysadminman.net/blog/?p=386#comment-1507 I'm afraid it's difficult to say without any more info. Are you using a ditro or did you install Asterisk/FreePBX yourself? Could it be iptables/firewall blocking the traffic? Can you make extension to extension calls? I’m afraid it’s difficult to say without any more info. Are you using a ditro or did you install Asterisk/FreePBX yourself? Could it be iptables/firewall blocking the traffic? Can you make extension to extension calls?

]]> By: Av http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386#comment-1504 Av Sun, 07 Feb 2010 00:35:29 +0000 http://sysadminman.net/blog/?p=386#comment-1504 I did what in this tutorial but my extension is not ringing, I couldn`t hear no sound. Please help me out here. Thanks I did what in this tutorial but my extension is not ringing, I couldn`t hear no sound. Please help me out here.
Thanks

]]> By: matt http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386#comment-1255 matt Wed, 17 Jun 2009 17:18:43 +0000 http://sysadminman.net/blog/?p=386#comment-1255 It could be that the voice stream is being blocked by a firewall (UDP port 5060) or that NAT is messing things up. Do you know if your Asterisk server or Extension is behind a NAT router? It could be that the voice stream is being blocked by a firewall (UDP port 5060) or that NAT is messing things up. Do you know if your Asterisk server or Extension is behind a NAT router?

]]> By: elmohem http://sysadminman.net/blog/2009/getting-started-with-freepbx-part-4-setting-up-a-did-number-386#comment-1254 elmohem Wed, 17 Jun 2009 09:09:51 +0000 http://sysadminman.net/blog/?p=386#comment-1254 I did what in this tutorial but my extension ringing and when answer the call is disconnect directly. How to solve this problem? Elmohem I did what in this tutorial but my extension ringing and when answer the call is disconnect directly.
How to solve this problem?
Elmohem

]]>